Trusted by 11,000+ households
Water Freedom System
Make Clean Drinking Water From the Air in Your Home
- Up to 60 gallons of water daily
- Simple 1-3 hour DIY build
- Works in any climate
- Built with hardware-store parts
Step-by-step blueprint · Start building today
What Is a Water Freedom System?
Strip away the marketing and it is a very simple idea: the air around your house is holding water right now, and a cold surface makes that water fall out of it. Anyone who has watched a glass of iced tea sweat on a July afternoon has already seen the physics. The blueprint sold by Chris Burns takes that everyday effect and scales it into a small appliance you assemble yourself — a fan, a chilled coil, a catch basin, a filter stack and a storage tank — so the sweat on that coil becomes water you can actually drink.
What arrives after checkout is a guide, not a crate. You get illustrated blueprints, measured parts lists, wiring notes and troubleshooting pages. You then walk into a hardware store and buy the components yourself, which is exactly why the whole thing stays affordable compared with the $1,500–$3,000 commercial atmospheric water generators sitting on retail shelves. Roughly 11,000 households now say they run some version of this build.
How Does a Water Freedom System Work?
The unit runs a continuous four-step loop, and once it is dialled in you mostly leave it alone.
1. Draw
A low-draw fan pulls humid room or outdoor air across the intake grille.
2. Chill
The air hits a cooled condenser coil and drops below its dew point, so vapour turns back into liquid and runs into the catch tray.
3. Clean
Raw condensate passes through sediment media, then activated carbon, then a UV chamber that deactivates bacteria and parasites.
4. Store
Finished water lands in a sealed tank with a tap, ready for the kettle, the dog bowl or a water bottle.
No chemistry, no additives, no plumbing connection. Because the compressor and fan are the only real electrical loads, a modest solar panel and a deep-cycle battery keep the whole thing running through an outage — which is the moment most people wish they had built it. If you want the national picture behind that worry, the U.S. Geological Survey publishes an ongoing water availability assessment worth ten minutes of your time.
Build it this weekend, not someday
One-time $39 payment for the complete digital blueprint.
Key Features of the Water Freedom System
Up to 60 gallons daily
Peak output in humid conditions, enough for a family's drinking, cooking and washing-up needs.
Three-stage purification
Sediment, activated carbon and UV stages together strip out over 99% of bacteria, parasites and chlorine taste.
Solar-capable power
Low enough draw to run off a panel and battery bank when the grid is down.
Hardware-store parts
Nothing proprietary. Every component has a named substitute if your local store is out of stock.
Scalable output
Add a second coil or a larger tank once you know your regional humidity curve.
Food-safe materials
The build spec calls out non-toxic tubing and tank materials rather than whatever is cheapest.
How to Set It Up at Home in an Afternoon
Step 1 — Print the parts list
One trip, one list. Budget a few hundred dollars depending on the tank size you pick.
Step 2 — Assemble the frame and coil
Mount the fan, coil and drip tray on the frame following the measured diagram. This is the longest stage, and it is still screwdriver work.
Step 3 — Stack the filters
Sediment first, carbon second, UV last. Order matters; the guide is blunt about it.
Step 4 — Power up and flush
Run the first tank to waste to rinse the carbon, then start collecting. Pick a spot with real airflow — a closed cupboard starves the intake.
What's Included?
- The complete illustrated build blueprint with exact measurements
- A costed shopping list with substitute parts for each component
- Filtration and sanitation guide covering media changes and cleaning intervals
- Solar and battery wiring notes for off-grid operation
- Maintenance and troubleshooting section for low-output days
- Water storage and emergency preparedness bonus material
Everything above, in one download
Instant access after checkout — blueprints, parts list and bonuses.
Why Consider It At All?
Three reasons come up again and again from people who build one. The first is cost: a household that drinks bottled water can burn through $500 or more a year, and the parts pay for themselves inside a couple of seasons. The second is trust — boil notices, ageing mains and seasonal restrictions have made a lot of people want a supply that does not depend on a pipe they cannot see. The third is drought. Long-term water scarcity is now a normal planning assumption across the Southwest, not a freak event.
Be realistic about the trade-offs, though. Output falls hard in dry air, the coil needs wiping, filter media needs replacing, and this is a build project rather than a purchase. Treat it as one layer of a household water plan alongside sensible water conservation habits and a stored reserve, and it earns its place. Treat it as a magic tap and you will be disappointed.
Who It Suits
Preparedness-minded families who want a backup that keeps producing after the taps stop.
Households tired of paying for delivered or bottled water every single month.
Frequently Asked Questions
How much water can the system realistically produce?
- Output tracks humidity. In humid air a well-built unit can reach up to 60 gallons a day; in dry inland air expect far less, and most owners scale up with a second condenser coil.
Is this a physical kit shipped to my door?
- No. You receive a digital blueprint with parts lists, diagrams and step-by-step build video access. You buy the parts locally, which keeps the cost low.
Where do I buy the parts?
- Everything comes from an ordinary home improvement store. The guide includes substitute components for every part, so an out-of-stock item never stalls the build.
Do I need to be handy?
- Basic tools and patience are enough. Most builders finish in one to three hours, and nothing requires welding or electrical certification.
More answers live on the FAQ page, and real owner write-ups are on the testimonials page.
Ready to build your own water supply?
Get instant digital access to the complete blueprint for a one-time $39 payment.